Steinbach Speed Clean Classic 310 Sand Filter System, 1 Piece

Speed Clean Classic 310 Sand Filter System

An efficient and high-quality filter system is one of the most important components of your pool. Through filtration and circulation, filter systems always ensure clean and clear water.
The Speed Clean Classic 310 sand filter system has a circulation capacity of 5,200L/h and is suitable for pools with a water volume of up to 22,000L.
A 7-way valve enables easy control. The standard manometer shows the operating pressure.
The filter system has a connection with Ø 32/38mm .
The boiler of the plant has a diameter of 320mm and the required amount of sand is approx. 20kg. Sand with a grain size of 0.7 - 1.2mm is recommended (sand is not included in the delivery).
The filter pump requires a mains voltage of 230V and has an output of 250W. There is a large pre-filter on the self-priming filter pump which catches dirt particles and thus protects the pump from damage.

• Base plate included
• Simple control with 7-way valve
• Self-priming pump
• Pump capacity 7,000 L/h
• Connection Ø 32/38mm
• 7-way valve with pressure gauge
• Noise level approx. 70 db
• Delivery head 7.50 m
• Suitable for salt water up to a salt content of 5g/L

High-Quality Filter Pump

• Good performance with low power consumption
• Self-priming
• Has a large pre-filter

Standard Connection

• Connection for swimming pool hose
• Ø 32/38mm

7-way Valve

The 7 settings are:

• Filter
• Backwash
• Rinse
• Circulate
• Emptying
• Winter position
• Closed

Solid Tension Ring

• Connects 7-way valve with filter container
• Quality checked

Drain Valve

• Standard drain valve
• Easy emptying of the container
• Without any effort or additional work

Transparent Sight Glass

• Visual inspection of the water
• Use for backwashing and rinsing
• Allows water-saving cleaning

Manometer (pressure control)

• Display of the current operating pressure by manometer
• Complemented by a colour scale

GREEN: Filtration given
YELLOW: Filtration available (system backwash recommended)
RED: Filtration no longer available (immediately backwash system)

*Backwashing cleans the filter medium (eg: quartz sand) and thereby reduces the resistance or pressure, which can be seen on the pressure gauge