Steinbach Pool Professional Oxygen Activator Liquid, 1 l

This liquid water care product also prevents algae growth. It makes use of active oxygen and does not contain chlorine.

• For use in combination with oxygen granules
• Improves the effect of disinfectants
• Prevents algae growth
• For initial dosage and long-term dosing

Dosage:
First, adjust the pH to the optimum value of 7.0 - 7.4. The oxygen value should be between 5.0 and 10.0 mg / l. For the initial dosage, add 200 g (approx. 200 ml)/10 m³ of oxygen granules and 100-150 ml/10 m³ of oxygen activator liquid. From then on, add 100 g (approx. 100 ml)/10 m³ oxygen granules every week via a skimmer. At the same time, add 40-50 ml/10 m³ oxygen activator liquid to the pool near the inlet nozzles every week. If there is a great deal of algae growth (recognisable by green traces), add up to 300 ml/10 m³ oxygen activator liquid after a shock treatment. To prevent algae growth, pre-treat the pool wall using undiluted liquid with a sponge before letting in the water.

Important information: Please note that this product should only be used according to the product description. It starts to act immediately after use. The dosage specifications only reflect experience and are not binding.

Please store the product in a cool, dry, and frost-protected place, well-ventilated and protected from light. Always transport and store containers upright.

This product is intended for use in private swimming pools only.

Use biocidal products with care. Always read label and product information before use.