Steinbach Pool Professional Oxygen Granules, 1 kg

Chlorine can irritate and dry out sensitive skin - if you're looking for an alternative this water care product relies on the disinfecting effect of active oxygen. If you have used chlorine until now, but would like to switch to oxygen granules, this is possible at any time!

• Disinfects with active oxygen
• Works without chlorine
• For initial dosage and long-term dosage

Dosing:
First, adjust the pH to the optimum value of 7.0 - 7.4. Make sure that the oxygen value is between 5.0 and 10.0 mg / l. For the initial dosage, use 200 g (approx. 200 ml)/10 m³ of oxygen granulate and 100-150 ml/10 m³ of liquid oxygen activator. After that, dissolve 100 g (approx. 100 ml)/10 m³ of oxygen granulate in water every week and add it via the skimmer. Also add 40-50 ml/10 m³ of liquid oxygen activator to the pool near the inlet nozzles. If the water becomes cloudy due to thundershowers, increased use, or temperature, add 400 g (approx. 400 ml)/10 m³ of oxygen granulate.

Important notes:
Please note that this product should only be used according to the product description. It starts to act immediately after use. The dosage specifications only reflect experience and are not binding. Always use in a dosage floater, skimmer, or dosage feeder.

Please store the product in a cool, dry, and frost-protected place, well-ventilated and protected from light. Always transport and store containers upright.

This product is intended for use in private swimming pools only.

Always read the label and product information before use.